 |
 |
 |
 |
Get your
JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor working right out the box, this exceptionally priced eStudioStar expert bundle comes with:
*JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor - Pack of 2
*Focusrite Scarlett 2i2 2 in/2 out USB 2.0 Audio Recording Interface -2nd Generation *AxcessAbles TRS14-XLR115M Audio Cable - stereo 1/4" TRS TO XLR male (15ft) - Pack of 2
JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor
The JBL 306P MkII - Powered 6.5"" Two-Way Studio Monitor is a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace.
Focusrite Scarlett 2i2 2 in/2 out USB 2.0 Audio Recording Interface -2nd Generation
Focusrite's second-generation Scarlett 2i2 is a portable audio interface designed specifically for use in a portable computer environment.
AxcessAbles TRS14-XLR115M Audio Cable - stereo 1/4" TRS TO XLR male (15ft)
This cable is designed to connect gear with balanced 1/4 inch outputs to equipment with XLR inputs. It is commonly used to connect monitor speakers to an audio interface and can be used in various pro audio situations.
Introducing Next Generation JBL 3 Series MKII Studio Monitors
Introducing Next Generation JBL 3 Series MKII Studio Monitors
JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor
Drivers
|
LF Driver: 6.5" / 165.1 mm
HF Driver: 1.0" / 25.4 mm HF Driver Type: Soft dome
|
Crossover
|
1425 Hz 4th order acoustic Linkwitz-Riley
|
Magnetic Shielding
|
Yes
|
Input Sensitivity
|
92 dB at 3.3
/ 1 m (-10 dBV input)
|
Power Configurations
|
Bi-amplified
|
HF Driver Power
|
56 W, Class-D
|
LF Driver Power Amp
|
56 W, Class-D
|
Frequency
|
47 Hz to 20 kHz (±3 dB)
|
Frequency Range
|
39 Hz to 24 kHz (-10 dB)
|
Low Frequency Extension
|
39 Hz
|
SPL
|
Continuous: 92 dB
Peak: 110 dB
|
Maximum Input
|
Maximum Peak Input Level (-10 dBV / +4 dBu): +6 dBV / +20.3 dBu
|
THD
|
System Distortion Criteria: <10% THD at maximum output with full compressor / limiter engagement
Electrical Distortion Criteria: 0.2%
THD @ 1 kHz / 2.83 VRMS output <1% THD @ 1 kHz, full rated output
|
Signal to Noise Ratio
|
75 dBA (A-weighted), 70 dBr (unweighted), relative to 2.83 VRMS output
|
Dispersion
|
H x V: 120
º x 90º
|
Inputs
|
1 x XLR female (balanced)
1 x TRS female (balanced)
|
HF Trim Control
|
-2 dB, 0 dB, +2 dB
|
Equalization
|
Boundary EQ:
LF Shelf at 50 Hz: -3 dB, -1.5 dB, 0 dB
|
Enclosure Type
|
Ported
|
Construction Material
|
MDF: 0.6" / 15.0 mm
|
Finish
|
Matte black PVC
|
Baffle
|
Injection-molded structural ABS
|
Power
|
100 to 240 VAC (±10%), 50 / 60 Hz
|
Focusrite Scarlett 2i2 2 in/2 out USB 2.0 Audio Recording Interface -2nd Generation
Type
|
USB 2.0
|
Converter
|
24-bit, internal clock
|
Sample Rates
|
44.1, 48, 88.2 and 96 kHz
|
Inputs
|
2 x XLR/TRS combo Microphone/Line/Instrument
|
Maximum Input Level
|
Microphone: -3 dBu
Instrument: -3 dBu Line: +20 dBu
|
Gain Range
|
Microphone: +10 dB to +55 dB
Instrument: +10 dB to +55 dB Line: +10 dB to +35 dB
|
Outputs
|
2 x 1/4" TRS phone
1 x 1/4" TRS phone Headphone
|
Output Impedance
|
<10 ohms
|
Output Level
|
Nominal: 0 dBFS = 10 dBu, balanced
15 mW into 150 ohms 30 mW into 50 ohms
|
Dynamic Range
|
Microphone/Line: 105 dB, A-weighted
Line Output: 117 dB, A-weighted
|
THD + N
|
Microphone/Line: 0.002%, -1 dBFS, 22 Hz to 22 kHz BPF
Instrument: 0.005%, -8 dBu input, 22 Hz to 22 kHz BPF Line Output: 0.001%, -1 dBFS, 22 Hz to 22 kHz BPF, unweighted
|
Frequency Response
|
Inputs: 20 Hz to 20 kHz, +/-0.1 dB
Outputs: 20 Hz to 20 kHz, +/-0.2 dB
|
Noise
|
Microphone EIN: <-120 dB, measured @ 55 dB of gain with 150 ohm termination (20 Hz to 22 kHz BPF)
Instrument: -87 dBu (22 Hz to 22 kHz BPF) Line: -90 dBu (22 Hz to 22 kHz BPF)
|
Signal to Noise Ratio
|
Line: >100 dB
|
Crosstalk
|
Input to Input: better than 90 dB
Output to Output: better than 90 dB Input to Output: better than 85 dB
|
Power Requirements
|
USB bus
|
System Requirements
|
Mac:
OS X 10.6.5 (32- and 64-bit) and above Windows: Windows 7 (32- and 64-bit), Windows 8, and Windows 10
|
Dimensions (WxDxH)
|
7 x 4 x 1.75" (175 x 100 x 45 mm)
|
Weight
|
1.3 lb (580 g)
|
AxcessAbles TRS14-XLR115M Audio Cable - stereo 1/4' TRS TO XLR male (15ft)
No Additional Information
2 x JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor 1 x Focusrite Scarlett 2i2 2 in/2 out USB 2.0 Audio Recording Interface -2nd Generation 2 x AxcessAbles TRS14-XLR115M Audio Cable - stereo 1/4' TRS TO XLR male (15ft)
|
|
 |
 |
 |
 |

|